- Native Ethernet over Fiber Transport and Termination
- Powerful Management and Security Features
- 4 Ports, Assignable as Network or User Interfaces
- Flexible Network and User Interfaces including Tri-speed UTP
- Advanced Diagnostic and Performance Measurements
- IEEE 802.3ad Aggregation Support for Link Protection and Bandwidth Doubling
- Network Interface Device terminating Network and User Interfaces and Facilities
- Redundant Power Supplies
- Jumbo Packet Support
- NEBS Level 3 Tested and Certified for Assured Performance and Safety
9151 Application Overview

Successful service deployment and high customer satisfaction in today's demanding business environment requires an intelligent demarcation device. Diagnostic, network performance and subscriber network/core interoperability and compatibility is a must. The 9151 Access Link Aggregation NID provides all these services and more. The 9151 SNMP management reporting and control of all configuration, status, diagnostic and traffic reporting functions keeps network control informed and services operating.
Deployment Flexibility
Each of the 9151's 4 ports are fully configurable for interface type and function. Individual Interface Modules lets you decide UTP or fiber interface, the speed, and network or customer interface. To help your field techs, LEDs lets them know network and customer port assignments. As shown above, the 9151 NID deploys equally as a Multi-tenant serving up to three independent customer links and as a Protected Services Terminating Unit.
Protected Services
IEEE 802.3ad Aggregation protects network access by providing link redundancy with sub-second switchover in the event of a link outage. The 9151 aggregates the network and customer links independently. With protection on both connections, customers receives up to 2 Gigabits of traffic bandwidth. The 9151 is also configurable to protect just the network link protected with a single connection to the customer network. This arrangement protects the network access link while limiting the overall customer bandwidth to that of a single port, 10Mbps, 100Mbps or 1Gbps
Alternative Products - 9151
Key Features |
![]() 9151 |
![]() 9145E |
![]() 9145EMP |
![]() 9155 |
![]() 9170 |
![]() 9171 |
![]() HS8000 |
|---|---|---|---|---|---|---|---|
| Number Of User and Network Ports | 4 | 1 User 1 Network 1 MMP |
4 User 2 Network |
12 | 24, 18 or 48 | 8, 10, 12 or 24 | 8 |
| Configurable Network/User Port Assignments | YES | YES | YES | YES | |||
| Number and Type of Interchangeable Interface Modules | 4 Single Port | 3 UTP/SFP | 4 UTP/2 SFP | 4 - Single Port 1 - 8 Port |
8 to 24 SFP 2 XFP (2) |
8 to 24 SFP 2 XFP (2) |
|
| Rack Mount | YES | YES | YES | YES | YES | YES | YES |
| Redundant Power | YES | YES | YES | YES | YES (1) | YES | |
| SLA Performance Testing | YES | YES | YES | YES | |||
| IEEE 802.3ad Link Aggregation | YES | YES | YES | YES | YES | ||
| Layer 3 Routing | YES | YES | |||||
| In-Band SNMP | YES | YES | YES | YES | YES | YES | YES |
| Out-of-Band SNMP | YES | YES | YES | YES | |||
| SFP Optics | YES | YES | YES | YES | |||
| Remote Optics | 10Mbps 100Mbps 1Gbps |
100Mbps 1Gbps |
100Mbps 1Gbps |
10Mbps 100Mbps 1Gbps |
100Mbps 1Gbps 10Gbps |
100Mbps 1Gbps 10Gbps |
100Mbps |
| Hardened (Extended Temperature) | YES | YES | |||||
(1) Available on all models except for the 9170-1 (2) On models with 10Gbps Ports |
|||||||










