Universal Fiber Optic Modem – Model 2340

With telephony and serial data plug-in Electrical Interface Modules, the 2340 Universal Fiber Optic Modem probably has your needs covered. Canoga Perkins designs flexibility into every product. The User Interfaces are no exception and supports a variety of applications and implementations. Supporting data rates up to 2.048 Mbps, they have the flexibility to interface with even the most difficult Crypto interfaces on the Black and Red sides, circuit extension from wireline and satellite modems and DSUs, and the difficult interfaces of Video Conference Systems. The 2340 has Canoga Perkins' advanced management processor and SideBand Management Channel for comprehensive status, configuration and diagnosis of local and remote troubles. This allows not only quick identification, but even helps anticipate problems before they happen. The quicker a trouble is identified, the quicker it is resolved, increasing circuit availability and user satisfaction.

  • Serial Data and Telephony Interfaces to 2.048 Mbps
  • Interchangeable, Hot Swappable User Interfaces
  • Powerful Management and Security Features
  • Internal, External, and Slave Clocking Modes
  • KIV and KG Encryption Equipment Support
  • Local and Remote Loopback Diagnostics
  • Multimode, Single Mode and CWDM Optics Options
  • Rack Mount and Standalone Enclosure for Central and Remote Locations
  • Continuous, Non-intrusive BERT Test to Monitor the Communications Link
  • NEBS Level 3 Tested and Certified for Assured Performance and Safety

2340 Application Overview


Reliable transport of user traffic is key to customer satisfaction. Just as important is the ability to meet a variety of applications and circuit configurations quickly and economically. The 2340 Universal Fiber Optic Modem has redundancy, resilience and flexibility built-in. With a variety of plug-in electrical interfaces, Single Mode, Multimode, 1310nm, 1550nm, CWDM and Single Fiber optics options, you have just about every situation covered. The 2340 supports Redundant Modem operation, protecting not only the Fiber Optic Path, but also Modem Hardware failures. Just what you need for those critical, must stay up applications.

Configurable control leads action/pass thru and interface conversion capabilities support a variety of applications and circuit placement. The 2340 Universal modem link can be the circuit, or used to extend the circuit from the application to another transmission system such as Satellite, Microwave or the Public Network. Special clocking and control lead options specifically address Red Side and Black Side Crypto requirements.

Comprehensive management for remote configuration, status monitoring and quick problem isolation is key to providing reliable services for a wide range of applications such as:

  • Enhancing InforSec/CommSec between the Crypto Equipment and the Application or communications facility
  • Linking Voice and Internet Traffic to District Headquarters
  • Transport of Critical Traffic 100Km or more
The 2340's comprehensive management suite provides you the tools to keep applications up and running. The 2340 implements Canoga Perkins' SideBand Management Channel (SBMC) for continuous management communication with the distant modem, or modems if in the redundant configuration. SideBand Management Channel resides outside the user data stream on the fiber, providing management communication without any disruption to the user's traffic. Management connectivity is key to redundant modem operation. Management communication paths between local modems and SideBand Management Channel allow all four modems to communicate with each other and coordinate actions. The SideBand Management Channel is used on both fiber paths, allowing full management communication even in the event of a fiber failure on one of the links. This provides Network Management Personnel full access and visibility at all times, allowing them to quickly respond to situations.

The 2340's Serial Data (RS-232, RS-449, RS-530, V.35) and Telephony (T-1, E-1) interfaces combined with flexible clocking, control lead, interface conversion capabilities and comprehensive management maximize network availability, ease of deployment, and rapid problem resolution. You get reduced CAPX and OPEX costs, greater user satisfaction, and increased overall success.

Alternative Products - 2340

Key Features


2340

2240

2270

2370
SNMP Management YES YES
Synchronous Data Rates to 2.048 Mbps (async to 1.544 Mbps) YES YES YES YES
Synchronous Data Rates to 6.312 Mbps (async to 12.6 Mbps) YES YES
Synchronous Data Rates to 20 Mbps (async to 12.6 Mbps) YES YES
Same Module Rack Mount and Standalone Enclosure YES YES
T1 Support YES YES YES
E-1 Support YES YES YES
RS-232 Support YES YES YES YES
Mil-188 Support YES YES YES YES
RS-422/V.35 Support YES YES YES YES
Multimode Optics YES YES YES YES
1310nm Single Mode Optics YES YES YES YES
1550nm Long Reach Optics YES YES YES
CWDM Optics YES YES
BIDI Optics YES YES
Modem Redundancy YES YES

Compare the key features of these products to decide which product will work best for your application. For more information, click on the product image.

Product Literature

Model 2340 Data Sheet
Download Data Sheet